Thorlabs offers single mode fiber optic patch cables with a variety of connector options, including FC/PC, FC/APC, and hybrid FC/PC to FC/APC and FC/PC to SMA. Also available are single mode patch cables with AR-coated FC/PC or FC/APC connectors for improved fiber-to-free-space coupling, low-insertion-loss patch cables, thermally-expanded-core (TEC) patch cables, high-power end-capped patch cables, retroreflector and partial reflector patch cables, and mid-IR patch cables based on fluoride fiber.
● Beyondtech single mode patch cable LC to LC 9/125 OS1 fiber is designed for duplex fiber optic equipment using Ethernet, Fiber Channel, Gigabit Ethernet Speeds, Data Center, LAN, SAN, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm).
● This fiber optic LC to LC 1 Meter LSZH Fiber Jumper conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications. Both ferrules are polished in UPC resulting in a minimal loss.
● Beyondtech singlemode fiber lc to lc jumper has a yellow colour jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm. The 1m fiber size is from connector A to connector B.
● The Beyondtech single mode fiber lc to lc cable operates at {{0}}ºC to +70ºC and has a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm.
● OS1 patch cables allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) - LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors.
●
●
●
●
● For 3.0mm, 2.4mm, 2.0mm jacket or 900um buffer;
● Single mode fiber: ITU - T G. 652D;
● Multi mode fiber: ITU - T G. 651;
● Fiber Min. Bending radius: 10D (Static).
F
These fibers have a 900 µm thick jacket, which is covered with a layer of aramid yarn for extra protection. 2.5 mm PVC cable jacket provides additional environmental protection.
Use modelF-PATCH-CUSTOM Use these fibers to configure custom fiber patch cords. You can specify fiber type, length, jacket, and input and output connectors.
A variety of standard fiber optic patch cables are available from stock and operate in the near UV 300 nm, visible 488/514 nm, 633 nm, IR 780 nm, 820 nm, 980 nm, 1060 nm or 1300/1550 nm. If no standard patch cable fits your application, try our custom patch cable configurator:F-PATCH-CUSTOM
Quality and standards are the foundation of FOCC. We are dedicated to providing customers with the outstanding, standards-compliant products and services. FOCC has passed many quality system verification, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service.
Please Note: Each cable is 100% optically inspected and tested for insertion loss before you receive it.
Industry Standard Flammability Rating OFNR (Riser) Jacket Fiber Patch Cable. The industry standard duplex fiber connector meets EIA/TIA 604-2 with ceramic ferrule for high speed cabling networks.
